| |
| Features of Operating Principle |
| |
| Diameter of scattered liquid drops in the common chemical operation is about 0.1～5000μm. Normally, separation problem of the particles with the diameter of more than 100μm is easy to resolve because their sinking speed is relatively fast...... |
| Contact us |
| |
Add：Anping Wire & Mesh Industrial Park of Hebei Province
Tel：+86-318-7800015
Fax：+86-318-7800025
M Call：13703188372
E-mail：jinxin@xh2008.net |
|
| |
| Domestic Standard of the Foam Removing Wire & Mesh |
| |
● HG5-1404（1405、1406）-81
There are gas-ascending type, expansion type (1405) and full tube type (1406). Diameter of the foam removing is from 300mm to 6400mm. There are two wire and mesh heights, 100mm and 150mm. Only the number of drawing and the material are needed when you place an order.
Example of the Label: HG5-1406-81-11，304/304
That indicates the foam removing wire and mesh with 304 stainless steel taken as material of the grid, wire and mesh; full tube, installed from upward, diameter 1600mm, and height 100mm. |
● HG/T21618-1998
Gas-ascending type, expansion type and full tube type are combined in the new standard, and four kinds of mesh types are provided, material categories are expanded; also increased the interval density when setting the specifications and sizes.
Example of the label: HG/T21618, foam removing wire and mesh S1600-100 SP 304/304
That indicates the foam removing wire and mesh of 304 stainless steel as the material of grid and wire, install upward, diameter 1600mm, height 100mm and SP mesh type. |
● HG/T21586-98 (Drawer type foam removing wire and mesh)
The standard is mainly suitable for the situations that need frequent cleaning and replace foam remover elements. For example, the drying cabinet and absorption tower of sulfuric acid unit. 56 kinds of nominal diameter is chosen within the scope of DN300mm～DN5000mm. Provide the number of drawing and the material you’ll choose will be enough when you place an order (among them, 316L, NS-80 and RS-2 is the wire and mesh material for sulfuric acid unit).
Example of the label: HG/T21586.11-98 WME-1600-100 NS-80/Q235-AThat indicates the drawer type foam removing wire and mesh adopted NS-80 as wire, carbon steel with diameter of 1600mm as the grid, height 100mm. |
● Other Non-standard Foam Removing Wire & Mesh
The foam removing wire and mesh is being widely used. Our company is able to produce all kinds of foam removers, special shaped or the replacement of the exported foam removers. For example, embedded type, external installation type, SWD1 type, square, rectangular, and irregular shaped etc for the customers. Height and density of the foam remover can be made according to customers’ requirement. We will provide drawings of supporting parts and installation drawing of the foam remover to the customers adopting domestic standard. |
|
